Solid waste heat value detector Rubber plastic waste combustion value test instrument

2022-06-01 0 By

Solid waste heat value detector rubber plastic waste combustion test equipment, solid waste heat value detector rubber plastic waste combustion test instrument by providing laboratory waste calorific value of instrument solid waste combustion test equipment, solid waste combustion heat value detector, solid waste heat test instrument, solid waste calorific value testing equipment, solid waste calorific value determination, combustible solid waste calorific value,Net calorific value calculated by solid waste, solid waste low calorific value estimation, solid waste, used in the determination of calorific value of solid waste treatment equipment, environmental engineering, solid waste, solid waste calorific value testing instrument, solid waste calorific power analyzer, building materials combustion heat value test instrument, the sample (s) building materials combustion heat value, building materials combustion heat value tester, touch screen, building materials products of combustion calorimeterTemperature range of combustion testing machine :5-40℃ temperature resolution :0.00001K Precision :≤0.01% Box door inset rubber strip, good sealing, prevent heat loss;The electrical control system is assembled by imported components, with good quality and reliable performance.Digital display of studio temperature, easy to observe and read;Temperature control: there are three kinds of preheating temperature to choose from. After the formal test, the furnace temperature can be rapidly restored to the temperature when it was in the furnace within 7min, and then the temperature is raised at the speed of 3℃/min.It has good temperature performance.Power supply voltage: 220V±10%50Hz If the initial actual furnace temperature is greater than 40℃, it is considered that the furnace is started, the initial furnace temperature will be set as the initial required furnace temperature, and the corresponding test time will be calculated automatically.When the required temperature reaches 200℃, slow down to increase at a rate of 6℃/ min until the required preheating temperature, into the constant temperature.For more exciting content, come to pay attention to the calorific value detector zhenglong